Powermatic 1791216K PWBS-14CS Bandsaw 1.5 HP 1PH 115/230V

The PWBS-14CS Bandsaw has an extra large, two-piece cast iron table. It consists of a 15″ x 15″ tilting section and a fixed 15″ x 5″ extension for a total working surface area of 15″ x 20″. A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6″ under guide capacity with 13-1/2″ frame to blade clearance. The aluminum rip fence comes with a resaw attachment.

• CARTER quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use
• Extra-large, two piece cast iron table consists of a 15″ x 15″ tilting section and a fixed 15″ x 5″ extension for a total working surface area of 15″ x 20″
• Chip blower ensures a clean, visible cut line
• Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction
• Exclusive design, quick-release precision T-square style rip fence with 4″ resaw attachment
• Precision balanced, nine spoke cast iron wheels reduce vibration
• Easy to read tensioning gauge settings indicated in “blade width” increments
• Full 6″ Resaw capacity (12″ with riser block) with 13-1/2″ width capacity
• 60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)
• Rigid one-piece welded stand requires no assembly
• Standard Equipment:CARTER quick tension release
• Adjustable miter gauge
• T-style rip fence with resaw assembly
• 3/8″ bandsaw blade
• Gooseneck work lamp and chip blower
• Riser block

• Style (Type) – Bandsaw
• Band Saw Size/Wheel Diameter (In.) – 14
• Cutting Capacity Width (In.) – 13-1/2
• Cutting Capacity Height (In.) – 6
• Blade Length (In.) – 93-1/2
• Minimum Saw Blade Width (In.) – 1/8
• Maximum Saw Blade Width (In.) – 3/4
• Blade Speed (SFPM) – 3,000
• Table Size (L x W) (In.) – 15 x 15
• Table Height from Floor (In.) – 44
• Table Tilt (Deg.) – 10 Left, 45 Right
• Table Size with Extension (L x W) – 15 x 20-1/2
• Dust Port Outside Diameter (In.) – 4
• Motor Power (HP) – 1-1/2
• Motor Phase – 1
• Motor Voltage (V.) – 115/230
• Prewired Voltage (V.) – 115
• Motor Current (Amps) – 11/5.5