Honda WSP50AA Submersible Pump

• 1/2hp, 115V submersible trash pump
• 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
• Move slurry and dirty liquids without the worry of damaging the pump.
• Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
• 110 gal./min capacity
• Operates on continuous duty in temperatures of up to 104 deg, and intermittent duty up to 140 deg. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
• Solids handling up to 2.0″
• Move slurry and dirty liquids without the worry of damaging the pump.
• Lightweight, durable stainless steel casing
• The pump wont rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
• Automatic non-mercury float switch
• Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
• Built in thermal reset switch
• If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
• 25 foot heavy duty cord
• Side discharge
• Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
• Operates fully or partially submerged
• Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
• Efficient air-insulated motor
• Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

• Pump Type – Submersible Trash pump
• Starting Type – Automatic
• Casing – Stainless Steel
• Motor (HP) – 1/2
• Voltage – 115
• Starting amps – 34
• Running amps – 8.3
• Duty – Continuous
• Motor insulation – Class F
• Overhead protection – Built-In Thermal Automatic Reset
• Discharge Type – Side
• Discharge capacity – 110 gpm
• Max. head (feet) – 32
• Port diameter ( inches) – 2.0 FNPT
• Maximum pressure – 14 psi
• Solids handling – 2.0″
• Impeller – Single Channel Stainless Steel
• Seals – Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
• Cord length (feet) – 25
• Cord type – Heavy-Duty 115V
• Dimensions (WxH) – 9.0″ x 21.5″
• Pump diameter – 9.0″
• Dry weight – 36 lbs.